Decking is acknowledged as being one of the least expensive home improvements you could do. This is because the cost of installing it is surpassed in the worth it adds to your home.
Decking is a fantastic option to tackle if you plan to sell your house, as well as if you want to enhance your living conditions and make better use of your garden.
But, the most important thing when it comes to decking is that it needs to last and be durable to ensure good value for the cost. Since it is outdoors, decking is subject to the harshest weather, and it can quickly alter its appearance and structural integrity.
To solve both of these problems, you must choose the appropriate fixings and fasteners suitable for the job. For decking, it is the TIMCO decking screws.
What Makes This Screw Suitable For Decking?
It is the ideal fixing for decking since it is simple to use and use and is strong and durable. It is also a specialised fixing for decking because:
The composite deck screws with a smaller diameter are made to fit between regular decking grooves. This improves stability and aesthetics and reduces the risk of a trip to the health or safety danger.
Ribs placed under that screw’s head enhance countersinking, resulting in a solid fixing and a tidy flush finish.
· A helix that is attached to the screw shank eliminates the debris.
· A sharp point of 25 degrees cuts into every type of wood quicker.
· A single deep thread provides an unsecured fixing and has a high pull-out resistance.
· All screws are plated with Green corrosion-resistant plating.
All green decking screws offered have a 4.5mm thread diameter and are specifically designed for the design of the decking platform.
You can tell in the finer details of the design and the manufacturing specifications that every little aspect has been considered to facilitate the installation of decking and increase the life span of decking in outdoor space.
What Kind Of Screws Are Required For Installing Deck?
A deck is one of the most satisfying home improvements you can add to your home. They not only improve the value of your home, but they can also be an ideal place to sit and relax or have a summer barbecue for those who can’t be able to.
One of the challenges that many DIY deck builders encounter when they build their deck is deciding on the type of fasteners they should use.
Various decking joist screws could be employed based on the outcome you’d like to accomplish. To help you understand the process of building decks, let’s look at the various types of fasteners available suitable for building deck boards.
Nails or Screws?
Nails or Screws is among the most important questions regarding the kind of fastener to choose. We’ve covered this in-depth in another blog article: Screws VS Nails. The basic idea is that the use of each one is contingent on the type of force that is acting on them.
For instance, deck framing typically uses nails. While nails may appear less sturdy than screws, they provide three advantages that make them a good choice when framing your deck:
- Shear Strength
- Cost
- Speed of Install
Nails offer a major benefit over screws while it comes to building decks: they can bend. Decks are usually vulnerable to the force and strength of strong winds.
Because winds can enter the deck and pull it against it, nails may break and block your deck from moving, while screws, which have much lower shear strength, can break. This is why a combination of nails and screws is the best choice for framing.
For deck boards, screws fixings are the type of fastener that you need to choose for their strength and stability. They are a great way to hold the deck boards and stop the common squeak on boards when nails are employed.
A board squeak occurs when there’s a distance between the wood decking and the frame. The squeaking happens as the board moves around when the weight is applied to it and the frame. Screws can help reduce this as they possess more holding power than nails.
The shank on plastic plugs is or shoulder and, sometimes, a notched tip. This notch is used to eliminate the necessity of drilling pilot holes, but we recommend drilling pilot holes whenever feasible to avoid accidental splits in the wood.
The Best Fasteners for Deck Boards
1. Painted Head Deck Screws
The deck screws with a painted head are the next kind of deck screws you’ll need to think about. They typically come in a variety of shades of brown, but they can even be purchased in different shades.
They are stainless steel, but they have an aesthetically designed head painted to conceal them from wood. They do not match perfectly in many instances, but they tend to be smaller than the standard stainless steelhead.
2. Wood Plugs
Wood Plugs are a fantastic between-the-line fastener system. Each hole that is drilled into these deck boards is countersunk into the wood. After that, the screw can be positioned on the surface of the wood.
Once the screw is installed, a small wood block with the same size that the hole was drilled is put into the hole. The fastener is hidden completely. If you’d like a particular colour, there are tools to create your wood plugs to match perfectly with the wood each time.
3. Hidden Decking Fasteners
The hidden decking fasteners can be among the modern and attractive types of fasteners. They are typically used with grooved boards composed of IPE wood. The fasteners fit into the grooves in the sides of the boards, creating a solid and secure fastening mechanism.
Hidden decking fasteners can be used on standard lumber using the slot-cutting router bit to cut notches in the deck board’s side. The fasteners are arranged in the grooves, and they are screwed directly to the deck’s frame.
This gives a great appearance as they assist in equal space the boards and completely hide fasteners away from the top of the board. With your new and beautiful deck having been constructed, now is the time to sit back, relax, and party at the new feature of your home.
